Creality
Creality K2 Plus
Creality K2 Plus
Couldn't load pickup availability
Creality K2 Plus – Large-Format Heated-Chamber CoreXY 3D Printer
The Creality K2 Plus is the largest machine in Creality's flagship K2 series: a fully enclosed CoreXY 3D printer with a 350 mm cube build volume, speeds up to 600 mm/s and 30,000 mm/s² acceleration. An actively heated chamber (up to 60 °C), a 350 °C all-metal hotend and a 120 °C bed let it print engineering materials such as ABS, ASA, PA, PC and carbon-fibre blends at full size without warping, while dual AI cameras handle calibration and keep watch over every print.
Want multi-colour printing? The K2 Plus works with the Creality Filament System (CFS), or choose the K2 Plus Combo listing to get a CFS in the box.
Key Features
- 350 × 350 × 350 mm build volume for large, single-piece parts
- Actively heated chamber up to 60 °C for ABS, ASA, PA and PC
- 350 °C all-metal hotend with a steel-tipped tri-metal nozzle
- Enclosed CoreXY motion – up to 600 mm/s and 30,000 mm/s²
- Dual AI cameras for calibration, monitoring and timelapse
- Full-auto levelling, input shaping and a built-in air filter
- Wi-Fi, Ethernet and USB with a 4.3-inch touchscreen
- CFS compatible – add up to 4 CFS units later for up to 16 colours
Technical Specifications
- Printing Technology: Fused Deposition Modeling (FDM), enclosed CoreXY
- Build Volume: 350 × 350 × 350 mm
- Printing Speed: Up to 600 mm/s
- Acceleration: Up to 30,000 mm/s²
- Print Accuracy: 100 ± 0.1 mm
- Layer Height: 0.05 – 0.3 mm
- Extruder: Direct drive
- Hotend: All-metal, steel-tipped tri-metal nozzle, 0.4 mm
- Nozzle Temperature: Up to 350 °C
- Heatbed Temperature: Up to 120 °C
- Chamber Temperature: Actively heated, up to 60 °C
- Build Plate: Flexible PEI build plate
- Levelling: Full-auto levelling
- Supported Filaments: PLA, PETG, TPU, ABS, ASA, PET, PA, PC, carbon and glass fibre blends, PPA-CF, PPS, PPS-CF (1.75 mm)
- Multi-colour: CFS compatible, up to 4 CFS units (16 colours)
- Cameras: AI camera for monitoring and AI camera for calibration, timelapse supported
- Display: 4.3-inch colour touchscreen
- Smart Features: Input shaping, RFID filament sensor, filament run-out sensor, power-loss recovery, air filter, lighting kit, remote control
- File Transfer: USB, Wi-Fi, Ethernet, Creality Cloud
- File Storage: 32 GB eMMC
- Slicer: Creality Print 6.0 or newer (G-code / 3MF)
- Power: 100–240 V AC, 50/60 Hz, 1300 W rated
- Printer Dimensions: 495 × 515 × 640 mm
- Net Weight: 35 kg
In the Box
- Creality K2 Plus 3D printer
- Touchscreen
- Flexible PEI build plate
- Power cable, tool kit and accessories
Specifications are from Creality. The CFS and filament are not included with this listing.
