Creality
Creality K2 3D Printer
Creality K2 3D Printer
Couldn't load pickup availability
Creality K2 – Enclosed High-Speed CoreXY 3D Printer
The Creality K2 is the compact member of Creality's flagship K2 series: a fully enclosed CoreXY 3D printer with a 260 mm cube build volume, speeds up to 600 mm/s and 20,000 mm/s² acceleration. It arrives pre-assembled – unpack it, fit the touchscreen, run the guided auto-calibration and start printing. A sturdy frame, all-metal 300 °C hotend, AI camera and built-in air filter make it a dependable machine for makers, schools, engineers and small print farms.
Want multi-colour printing? The K2 works with the Creality Filament System (CFS), or choose the K2 Combo listing to get a CFS in the box.
Key Features
- Fully enclosed CoreXY motion – up to 600 mm/s and 20,000 mm/s²
- 260 × 260 × 260 mm build volume in a compact footprint
- Full-auto levelling that probes only the area being printed, for faster starts
- All-metal hotend with a steel-tipped tri-metal nozzle, up to 300 °C
- AI camera for remote monitoring and timelapse
- Silent Mode, built-in air filter and chamber lighting
- Pre-assembled: plug in and print
- CFS compatible – add up to 4 CFS units later for up to 16 colours
Technical Specifications
- Printing Technology: Fused Deposition Modeling (FDM), enclosed CoreXY
- Build Volume: 260 × 260 × 260 mm
- Printing Speed: Up to 600 mm/s
- Acceleration: Up to 20,000 mm/s²
- Print Accuracy: 100 ± 0.1 mm
- Layer Height: 0.05 – 0.3 mm
- Extruder: Direct drive
- Hotend: All-metal, steel-tipped tri-metal nozzle, 0.4 mm
- Nozzle Temperature: Up to 300 °C
- Heatbed Temperature: Up to 100 °C
- Build Plate: Flexible PEI build plate
- Levelling: Full-auto levelling
- Supported Filaments: PLA, PETG, ABS, PET, PLA-CF (1.75 mm)
- Multi-colour: CFS compatible, up to 4 CFS units (16 colours)
- Camera: AI camera for monitoring, timelapse supported
- Display: 4-inch colour touchscreen
- Smart Features: Input shaping, filament run-out sensor, power-loss recovery, air filter, lighting kit, remote control
- File Transfer: USB, Wi-Fi, Creality Cloud
- File Storage: 8 GB eMMC
- Slicer: Creality Print 6.0 or newer (G-code / 3MF)
- Power: 100–240 V AC, 50/60 Hz, 1350 W rated at 220 V
- Plug: UK 3-pin plug
- Printer Dimensions: 404 × 436 × 545 mm
- Net Weight: 18.38 kg
In the Box
- Creality K2 3D printer
- Touchscreen
- Flexible PEI build plate
- UK power cable, tool kit and accessories
Specifications are from Creality. The CFS and filament are not included with this listing.
