ESP32 S3 DevKitC-1 development board

The ESP32-S3-DevKitC-1 development board module is equipped with ESP32-S3-N16R8.

 

This series of programs is backward-compatible. For example, N4 programs can run on N8 and N16 without modification.

Wi-Fi:

Supports IEEE 802.11 b/g/n protocol

Supports 2.4 GHz frequency band with 20 MHz and 40 MHz bandwidth. Supports 11n mode with data rate up to 150 Mbps

Wireless multimedia (WMM)

Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU), immediate block ACK

Fragmentation/reassembly hardware acceleration (hardware TSF)

4.x Low-Power Wi-Fi

Supports station mode, SoftAP mode, and Station + SoftAP mixed mode under the same BSS

*Note: When scanning ESP32-S3 in station mode, the SoftAP channel will change at the same time

Wireless Features:

*802.11 mc-FTM

*Bluetooth

*Low-power Bluetooth LE: Bluetooth 5, Bluetooth mesh

*High-power mode (20 dBm)

Supports 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps, extended advertising

Multiple coexistence mechanisms: coexistence with Wi-Fi and Bluetooth, sharing a single antenna. 

-

Xtensa

32-bit LX7 dual-core processor, main frequency up to 240 MHz

CoreMark Score

Single-core, 240 MHz: 613.86 CoreMark; 2.56 CoreMark/MHz

Dual-core, 240 MHz: 1181.60 CoreMark; 4.92 CoreMark/MHz

Memory:

128 KB instruction RAM

128 KB data RAM

Supports external SRAM up to 384 KB

128 KB ROM

16 KB SRAM for RTC

Interfaces:

UART, SDIO, SPI, I²C, I²S, PWM, GPIO, OPI interface, supporting multiple external flash and PSRAM

Supports program downloading and debugging through USB, with support for online programming

Provides up to 45 GPIO pins depending on the package type.